Honeywell E3Point CO & NO2 Calibration Kit | 34L

$275.00
Availability:
5-7 Business Days
Weight:
10.00 LBS
Shipping:
Calculated at Checkout
Keep Honeywell E3Point CO and NO2 sensors calibrated with this small cal kit, including calibration gas, regulator, adapter with tubing, and carrying case.
See full description

SmALL Calibration Kit for Honeywell E3Point Gas Monitors – CO and/or NO2 Sensors (34 Liter Size Cylinders)

Important Delivery Information:

Orders can only be expedited if the Next Day Air shipping option is selected. The standard lead time for NON Next Day Air orders is 3 business days.

Includes everything needed to calibrate the instrument: Carrying Case, Regulator, Calibration Adapter with tubing, Calibration Gas

Brand: Intermountain Specialty Gases

Bottle Size:   34 Liters (you will probably get 50 calibrations out of a bottle of gas)

Concentration (CO - Carbon Monoxide):      100 ppm (Shelf Life: 48 Months)

Concentration (NO2 - Nitrogen Dioxide):     5 ppm (Shelf Life: 6 Months)

The SMALL Calibration Kit for Honeywell E3Point Gas Monitors provides the essential equipment and calibration gas needed to calibrate Honeywell E3Point fixed gas detection systems equipped with Carbon Monoxide (CO) and/or Nitrogen Dioxide (NO2) sensors. This complete calibration kit is designed to simplify routine gas detector calibration and help maintain the accuracy and reliability of your fixed gas monitoring equipment.

Each kit includes the necessary calibration accessories and gas for servicing compatible Honeywell E3Point gas monitors. Choose the appropriate gas configuration based on the sensors installed in your gas detection system.

Calibration Kit Includes:

  • Protective carrying case

  • Calibration gas regulator

  • Calibration adapter with tubing

  • Calibration gas cylinder

 Available Calibration Gas Specifications:

Carbon Monoxide (CO) Calibration Gas

  • Gas concentration: 100 ppm CO

  • Cylinder size: 34 liters

  • Shelf life: 48 months

Nitrogen Dioxide (NO2) Calibration Gas

  • Gas concentration: 5 ppm NO2

  • Cylinder size: 34 liters

  • Shelf life: 6 months

A 34-liter calibration gas cylinder will typically provide approximately 50 calibrations, depending on calibration procedures and gas consumption.

Compatible Applications

This calibration kit is intended for Honeywell E3Point fixed gas monitors equipped with:

  •  Carbon Monoxide (CO) sensors
  • Nitrogen Dioxide (NO2) sensors

  • CO and NO2 sensor configurations, where applicable

 Why Choose a Honeywell E3Point Calibration Kit?

Routine calibration is an important part of maintaining fixed gas detection systems. Using the appropriate calibration gas, regulator, and calibration adapter helps ensure that your Honeywell E3Point gas monitor can be tested and maintained according to the manufacturer's recommended procedures.

 

Frequently Asked Questions About Honeywell E3Point Calibration

How often should a Honeywell E3Point gas monitor be calibrated?

Honeywell documentation for the E3Point standalone monitor recommends gas testing every 6 months and calibration every 12 months. Calibration and inspection frequency should follow the specific monitor's manual, sensor configuration, operating conditions, and applicable facility requirements.

How often should a Honeywell E3Point gas detector be bump tested?

For the E3Point standalone monitor, Honeywell's published maintenance guidance recommends a bump or gas test every 6 months. More frequent testing may be appropriate depending on environmental conditions, facility safety policies, and applicable regulations.

What is the difference between a bump test and calibration?

A bump test exposes the gas sensor to a known concentration of test gas to verify that the sensor responds and the alarm functions operate. Calibration adjusts the monitor's readings to match a known reference gas concentration. A successful bump test does not replace scheduled calibration.

What gases are available in this Honeywell E3Point small calibration kit?

This calibration kit is configured for Carbon Monoxide (CO) and/or Nitrogen Dioxide (NO2) sensors. The available gas concentrations are 100 ppm CO and 5 ppm NO2.

Can this calibration kit be used for both CO and NO2 sensors?

The kit is offered for Honeywell E3Point monitors with CO and/or NO2 sensors. Select the appropriate gas option for the installed sensor configuration when ordering. Confirm that the selected calibration gas is appropriate for the specific sensor and calibration procedure.

How long does the calibration gas last?

The listed CO calibration gas has a shelf life of 48 months, while the NO2 calibration gas has a shelf life of 6 months. Always check the cylinder expiration date before use. NO2 calibration gas has a substantially shorter shelf life and should be monitored accordingly.

How many calibrations can I get from a 34-liter calibration gas cylinder?

A 34-liter calibration cylinder will typically provide approximately 50 calibrations. Actual usage depends on regulator flow rate, gas application time, and the manufacturer's calibration procedure.

What is included in the Honeywell E3Point small calibration kit?

The kit includes a calibration gas cylinder, regulator, calibration adapter with tubing, and carrying case.

Why is routine calibration important for Honeywell E3Point gas monitors?

Routine calibration helps ensure that gas monitoring equipment provides accurate readings and responds appropriately to hazardous gas concentrations. Proper maintenance is especially important in parking garages, commercial buildings, mechanical rooms, and other areas where carbon monoxide or nitrogen dioxide may accumulate.

Where can I purchase a Honeywell E3Point calibration kit?

TG Technical Services offers small and standard calibration kits for Honeywell E3Point gas monitors, including kits for CO, NO2, oxygen, methane, propane, and other sensor configurations.

Order your SMALL Honeywell E3Point Calibration Kit from TG Technical Services for a convenient calibration solution for CO and/or NO2 gas detection applications.