COMPLETE Macurco Network Gas Monitor System with CO Sensors

Was: $3,234.00
Now: $2,748.90
Availability:
Normally in stock, please call for current delivery
Weight:
5.00 LBS
Shipping:
Calculated at Checkout
#Complete gas monitoring system#Select number of sensors below#Modbus with daisy chain wiring
See full description

Call us at 816-524-8100 for pricing on systems with more than 10 sensors

This is a complete Carbon Monoxide gas monitoring system with one Macurco DVP-1200 Controller and CM-6 gas monitors

Here are some additional details:

DVP-1200 with Digital w/ BACnet IP Controller Assembly 

Click here for Specifications and details

Here is a quick summary of the Controller

The DVP-1200 controller in conjunction with Macurco gas detectors provides automatic control to help maintain an acceptable environment in parking garages or other applications. This control panel offers an expandable system with up to 192 addressable detectors in the field. The DVP-1200 comes standard with four relays, as well as expandable onboard relay options (+2, +4). Other outputs on the DVP-1200 include three analog outputs, four 24VDC drivers, and BACnet IP. The DVP-1200 can be connected to up to two remote relay boxes with each remote relay box containing two relays. With the expandability of this panel, the DVP-1200 will fit into any gas detection application.- ETL Listed, LADBS Approved

Key Features

  • 90-250 VAC input

  • Three RS-485 channels can connect up to 192 detectors  (64 per channel)

  • Up to 12 relays
    • Standard with four onboard relays
    Up to four optional onboard expansion relays (+2 or +4)
    • Can be connected to two remote relay boxes (two relays in each box)

  • (3) 4-20mA outputs for VFD control

  • (4) 24VDC outputs for alarm, trouble, remote notification

  • BACnet IP (ethernet connection)

  • Lockable NEMA4x type enclosure

  • A total of eight zones can be defined

  • Event logging

 CM-6 Gas Monitor with CO Sensor

Click here for Specifications and details

Here is a quick summary of the gas monitor 

The CM-6 Low Voltage monitor detects Carbon Monoxide (CO) in commercial facilities such as parking garages, boiler rooms, etc. It can be used as a stand-alone detector and controller and as an analog transducer for use with Macurco control panels and other systems – ETL Listed, LADBS ApproveKey Features

  • 12-24VAC or 12-32VDC input

  • 5A SPDT Fan control relay

  • 0.5A N.O. or N.C. Alarm Relay

  • Selectable Fan and Alarm Relay Actuation Settings

  • Digital Display (0-200ppm of CO), Internal Buzzer

  • Coverage Area:  up to 7,500 sq. ft.

  • 4-20mA current loop

  

Videos Hide Videos Show Videos