Macurco Gas Boiler Controller (120 VAC Version) Prepackaged Kit with CO Sensor

Was: $1,850.00
Now: $1,387.50
3.00 LBS
Calculated at Checkout

This is a PREPACKAGE Macurco Gas Boiler Controller and it includes the following:

  • Boiler Controller (120 VAC Version)
  • One CM-6 Carbon Monoxide Gas Monitor 
  • One Remote Horn/Strobe with Blue Lens
  • One E-Stop Button

Click here for more information from Macurco.

The Gas Boiler Controller (GBC) used in conjunction with Macurco Gas detectors is used to shut down boilers in the presence of gas. Using a single detector or up to four gas detectors the controller can control up to 8 dry contact outputs. These outputs are designed to shut down the boiler system upon the detection of carbon monoxide and/or combustible gases such as natural gas or propane. If the detectors are programmed in latching mode then utilizing the Gas Boiler Controller you can reset the power to disengage the latched relay. The Gas Boiler Controller has a green power light, a red alarm light, a boiler reset button, and an audible buzzer.

Key Features
• Shutdown up to 8 boilers individually via expansion relays
• Customize up to 8 10A SPDT Relays (sets of 2)
• Customize up to 4 expansion relay boards
• 24VDC driver for horn/strobe
• Opaque Polycarbonate, NEMA 4X/6P (IP66/68)
• Audible Buzzer
• Output power supports up to 4 detectors
• 24V or 120V options

• Boiler Rooms

Two year limited warranty


SKU numbers
GBC-120-2, 70-2900-0700-1 120VAC
GBC-120-4, 70-2900-0700-2 120VAC
GBC-120-6, 70-2900-0700-3 120VAC
GBC-120-8, 70-2900-0700-4 120VAC